Geothermal Heating and Cooling in Oxford, Mississippi

Geothermal System

Geothermal heating and cooling in Oxford, Mississippi, is an energy-efficient choice for your house.

Like heat pumps, a geothermal system forces heat from one place to another. It utilizes an in-ground loop system to bring warmth from the land to your house.

This system uses the earth’s reserved fuel, which can convert into substantial savings on your energy expenses.

As opposed to standard furnaces, the EPA states owners using geothermal heat pumps can save 70% on heating bills and up to 50% on cooling each year. This suggests you might save approximately $400 to $1,500 every year, which may help your geothermal heating and cooling system pay for itself in just a matter of a few years.

A new geothermal system may also make you eligible for utility refunds.

Give our pros a call at 662-281-1231 and we’ll help you create the best geothermal system for your residence.

CALL TODAY 662-281-1231

8 Benefits of Using Geothermal Energy

Geothermal heating and cooling fixtures are extremely energy efficient and could continue to run much longer as typical furnaces and air conditioners. Here’s a couple of other advantages to placing one of these geothermal systems at your home:

savings icon

1. Energy Savings

The majority of units are just about three times better than fossil fuel systems. The Environmental Protection Agency has calculated geothermal has the potential to save you up to $1,500 every year. These funds could help the geothermal heating and cooling system pay for itself in no more than a few years.

life span icon

2. Extended Years in Operation

Geothermal systems tend to outlast commonly used units, mainly since they are below ground level. You can expect your geothermal system to continue operating for a very long period of time. Heating equipment will usually need to be changed out after 15 years.

free hot water icon

3. Free of Charge Hot Water

Geothermal generates no-cost hot water. It can reduce your power consumption of hot water up to 60%. Your exact savings will be determined by the number of people living in your home and what quantity of hot water your family uses.

Not only does the geothermal heating and cooling system produce hot water, in various cases it creates “more than free” hot water. This means the unit in practical terms becomes more cost-effective when producing hot water.

heating and cooling icon

4. Joined Heating and Cooling System

Geothermal heating and cooling equipment can heat and cool your house. You won’t require an AC outdoors or separate heating unit in the house, unless you reside in a chilly area. A split heating system is available for regions where conditions commonly drop below freezing.

humidity control icon

5. Superior Humidity Coordination

Geothermal sustains around 50-50 relative indoor dampness, causing it to be quite beneficial in damp parts of the house.

safe icon

6. Better Preventive Measures

As geothermal doesn’t require combustion to supply warmth, you don’t have an obligation to concern yourself with gas leaks or carbon monoxide.

low maintenance icon

7. Little Repairs

There is a smaller amount of servicing involved with a geothermal system given that there is no open air equipment. This makes it less subject to breakdown throughout sultry summers. Since it doesn’t rely on outside weather, no defrost controls are needed as in the case of a regular heat pump.

quiet icon

8. Quiet Operation

Geothermal is like anything else you acquire in life. Giving not much now generally indicates you receive no more in return. Well-made and appropriately installed geothermal units will give you many months of quiet service.

Kinds of Geothermal Equipment

Open and closed geothermal loop systems

There are a couple of basic styles of geothermal heating and cooling systems: open loop and closed loop.

Since these loops are deep in the earth, initial placement will affect your grass. Despite that, the loops won’t be visible as soon as the grass has grown back.

Open Loop Geothermal

Open loop geothermal uses groundwater to transport heat. It can be arranged to function with a well, pond or lake.

This system is generally the most energy saving because of consistent groundwater temperatures. However, it’s not always possible because of a lack of groundwater or extreme amount of iron in the groundwater. Local code may also prohibit these geothermal systems in your area.

Closed Loop Geothermal

Closed loop geothermal utilizes a continuous loop to transport water (or antifreeze solution for cold areas) to the ground and back to the geothermal system. The water is redistributed in a pressurized pipe as an alternative to combining extra water.

There are several installing selections, including horizontal, slinky and vertical.

Call the Geothermal System Experts at Franklin's Heating & Air Conditioning, Inc

Geothermal equipment is a strong investment in your house. But choosing the correct geothermal equipment and perfect company to add the equipment to your home can seem like a complex process. At Franklin's Heating & Air Conditioning, Inc, we find it to be simple with technical help from our heating and cooling pros.

Call us at 662-281-1231 or contact us by email to begin the process today.

CALL TODAY 662-281-1231